Welcome back to another fun-filled week of snark, honorable mentions from the Challenge, some of my beadwork (yes, I have found some time to bead, despite everything that has been going on!), and a tutorial! This is going to be a long one, boys and girls, so grab on to your nearest glass of wine (or whatever else lifts your spirits) and hang on!
First, let me apologize about the tone of last week’s posting. I know it was down and depressing, and I apologize. Sometimes though, you just need an outlet for your emotions, and since my family was center stage in the cause of mine, it fell to writing about it here. Not fair to you. No more, I promise.
Believe it or not, I not only have been beading, but actually won a little something in a challenge myself. Bello Modo held their Crescent Design Challenge, where original submissions had to be made using the Czech mates Crescent beads as the primary design bead. I was proud that my design “Eclipse” was selected as one of their runner-ups. I am currently writing a tutorial to it, and it will be available for sale on my website in the next couple of weeks!
This week, I had a lot of fun trying out the new Es-O and Tipp beads I got from Potomac Bead Company in the “Tipp Topp” bracelet by Akke Jonhof. You can find the pattern in the April/May edition of Beadwork Magazine. Did I follow the pattern as written? Well geez, do I ever??? Seriously though, the only changes I made, were in attaching the clasp. I used a 2-holed bar and a few seed beads before attaching my magnetic clasp instead of how Akke did it. I just liked the structure and strength of it a little better.
In my version I also played with some of the newer bead colors too. I used pastel light grey Tipp beads (though I have to warn you they are considerably darker than on the website photo), bordeaux Es-O beads, pastel light grey O-beads, and 6mm faceted rounds in white grey luster. As I mentioned before, I did use a couple of 2-hole bar bead in hematite on each end with some seed beads in silver lined grey to attach my magnetic clasp.
This week I bring you a tutorial for an easy beaded bezel for a cabochon, courtesy of Leslie Rogalski, Creative Director for the Beadsmith Inspiration Squad. Though this one is for a 24mm cabochon, it can easily be adapted for any size.
buy antabuse canada What you will need:
- 1 – 24mm cabochon (glass/stone/crystal, etc.)
- 1 gm 11/0 seed beads (galvanized muscat shown)
- 20 size 11 delica color B (violet sparkle lined DB-0610 shown)
- 40 – 2mm round or Firepolish crystals (jet sliperit shown)
- 1 – 6mm round or Firepolish crystal
- Cord and clasp of choice
- Fireline/Wildfire/One-G/KO Beading thread
- Size 11 or 12 beading needle – ( my website note: I personally recommend Tulip needles – Becca)
- Scissors or a thread burner ( like this note : I personally recommend the Berkley Hot Line Cutter – the tip is retractable, it comes with the batteries and an extra tip, can be found in most sporting goods stores in the fishing department, and costs less than $10!)
- On a 1 yd (.9m) piece of thread pick up 1A and 1B ten times for a total of 20 beads. Sew through all the beads again and pull into a ring; leave slight ease in order to sew through these beads in subsequent steps. Knot tail to working thread. Exit the first A strung. Pick up 8A, 1 crystal, and 8A. Skip the B in the ring and sew through the next A, making a loop.
- Repeat around the ring for ten loops. The last loop sews through the first A in the ring. Exit through the first 8A and the crystal in the first loop strung.
- String 3 crystals. Sew through the crystal exited in the loop forming a loop of 4 crystals. Exit the crystal in the loop.
- String 1A, 1B and 1A. Sew through the next loop’s crystal. Make sure the loop is flat, not twisted, before sewing through the crystal. Repeat Steps 3 and 4, pulling the beads close, to add 4-‐crystal loops at the top of each loop. Sew through the first loop’s crystal, and circle through the crystal picot to exit the top crystal. Make sure the three beads between crystals are pulled up snugly, without gaps. The beadwork will cup as you work.
- Place cab face up in the beadwork. String 2A and pass through the top crystal in the next loop. Continue around the ring, pulling the beads snugly to capture the cab. Sew again through the circle just formed of A beads and crystals.
- Sew through the beads to meet the tail on the underside, knot, weave in the ends, and trim.
- Customize the size of the bail to fit over your rope or cord by adding or subtracting A and B beads in the next steps.String a stop bead on 18″ (46 cm) of thread. Leaving a 6″ (15 cm) tail sew through the second, third, and fourth A beads in one strand of one of the loops (counting from the front of the cab). String a 2mm crystal, 1A, 1B, 1A, 1B, 1A a(or more for a larger bail space) and a 2mm crystal. String one 6mm round, a 2mm crystal, 1A, 1B, 1A, 1B, 1A (or however many you just strung,) and a 2mm crystal. Sew through all the beads again one and a half times, to exit the 6mm bead. Remove the stop bead.
- String a 2mm crystal, 1A, 1B, 1A, 1B, 1A (or however many you just strung) and a 2mm crystal. Skip one strand and sew through the second and third A beads in the next strand of A beads. String a 2mm crystal, however many A and B beads you just strung) and a 2mm crystal. Sew through the 6mm bead and through all the beads in this step. Weave in the thread ends to secure and trim.
So, to wrap up the Sarcastic Beads and Yarn Challenge Challenge Spring 2016, I wanted to bring you just a few more Honorable Mentions! These are a few that stood out to me and the judges as simply amazing for various reasons about to be explained.
CRAW, or in layman’s terms, Cubic Right Angle Weave, is as about as difficult a stitch as a beader will ever run across. It requires time, patience, and did I mention time and patience? Oh yeah, I think I did! Girija Kuppaswamy’s 21 inch version of Jill Wiseman’s CRAW rope tutorial, (yes – TWENTY-ONE INCHES!) obviously took a LOT of time and patience, and was simply beautiful too!
JR An Carol Carnes submitted a LOT of entries, but the one that really took my breath away was the Superduo bezel (tutorial by Allie Buchman of Potomac Bead Company), using the reversible angle and such vibrant shades of the Challenge colors!
Mary Kearney is someone I see in a lot of the beading groups on Facebook, as well as the Dry Gulch Beads & Jewelry monthly color challenges, and she certainly did not disappoint in my Challenge with her Jill Wiseman Cellini spiral, which used nearly every Challenge color there was to use! Simply a gorgeous piece of beadwork!
And then there was the one thing that surprised me in just how much I loved it, because I have never really been a fan of beaded beads. However, both of Sherry Palmer-Zieman’s entries, “Frill-Seeker,” a Trendsetters by Yumiko Watanabe, and Allie Buchman’s “Moon Lantern” bracelet both contained beaded beads, and I simply adored them!
Going to wrap up this late edition of Sarcastic Beads and Yarn for the week, BUT, that does NOT mean I do not want to hear that little “ding” on my phone that means I have a comment from you fine folks! Also, if you read my plea for help last week, well, the song remains the same. I need all the help I can get with keeping this site up and running and there is a handy little Paypal donation button on the side if you would be so kind. I want to thank Sheila P. and Linda N. for helping me out with their kind generosity this past week, and Dorothy F. before that.
Until next time, stay smart, or stay smart sassy!
Coming Next Week: Spotlight on some cool bead artisans from around the globe!